The new designed 2nd version software Extremely low resistance factory high quality MosFETs for high current usage Adjustable cut-off DLBM on/off
The new designed 2nd version software and hardware have many new features.
Supports all motor types up to 210,000 rpm(2 Poles motors).
Extremely low resistance, factory high quality MosFETs, for high current usage.
Dualsky Governor Mode(DGM) ready.(40-90A)
Adjustable cut-off, either motor stop or reduction in power.
DLBM on/off - Dualsky Linear Brake Mode. Brake strength can be adjusted by transmitter when switch on.
Full protection features including: Low voltage cut-off, Over heating protection, signal loss auto cut-off.
Normal, Soft or Super-Soft start up modes available, for both fixed wing and helicopter setups.
Smooth and accurate throttle control throughout the range.
Throttle digital signal sampling, compatible with the signal frequency of 14 msNormalmode and 7 ms high-speed mode (HS Mode).
Throttle range can be re-calibrated, so suitable for all brands of transmitter.
Fully PC programmable when used with Dualsky USB link(#45525).
Compatible with programming card(#45200) for easy re-programming at the field!
6A–30A：Stable linear BEC power supply, support up to 3S Lipo.
40A–80A：UBEC switching power supply, support up to 6S Lipo,3A, easily support 4-5pcs of standard Digital Servos.
100-130A：Control signal applied OPTO technology, eliminate the interference from high voltage to the control system .(以上文字适用于100-130A)
Item Name：Xcontroller BA brushless & sensorless ESCsItem No：
|45203||XC0610BA V2, ESC 6A, 2-3s LiPo, for plane & heli|
|45204||XC1010BA V2, ESC 10A, 2-3s LiPo, for plane & heli|
|45081||XC1210BA V2, ESC 12A, 2-3s LiPo, for plane & heli|
|45082||XC1812BA V2, ESC 18A, 2-4s LiPo, for plane & heli|
|45083||XC2512BA V2, ESC 25A, 2-4s LiPo, for plane & heli|
|45084||XC3012BA V2, ESC 30A, 2-4s LiPo, for plane & heli|
|45211||XC4018BA V2, ESC 40A, 2-6s LiPo, for plane & heli|
|45207||XC6018BA V2, ESC 60A, 2-6s LiPo, for plane & heli|
|45209||XC8018BA V2, ESC 80A, 2-6s LiPo, for plane & heli|
- High voltage, suport 5S-12S, OPTO,
- 120A(150A, 15s) W/ 6S Lipo, 100A(120A, 15s) W/ 12S LiPo
- New firmware version 2.3, fully programmable
plus for air
compatible with V2 ESCs, mini LCD display, USB upgradable
|45200||ProgCARD V2, for Xcontrollers BA V2|
|45525||USB LINK, for Xcontroller BA V2|
|45316||XC0610-Circle, for XM2812RTR|
|45315||RevCARD, for XC0610-Circle|